VOLTBAR GLASS STICKER

VOLTBAR GLASS STICKER is now waterproof as we have two design , face mask required and not allowed for underage.

Glass sticker voltbar make your glass please be aware that

Application Instructions:

1. Ensure you are applying the VOLTBAR GLASS STICKER at room temperature (10°C to 35°C), and the surface you are applying to will not exceed the safe range of -15°C to +60°C.
2. Thoroughly clean the surface you wish to apply to with soap and water. Dry well.
3. Peel the window sticker from the backing paper and lightly lay it on the surface.
4. Apply pressure over top of the sticker, smoothing the entire sticker from the centre outwards to avoid air bubbles.
5. Allow the glue to initially bind for 20 minutes.
6. The sticker is now applied, leave for a further 24 hours to ensure maximum strength

Please note: These are designed of VOLTBAR GLASS STICKER to be applied to the inside of a window, so artwork will be reversed on the sticky side. Areas that are normally “White” will be transparent.